IM Loss Evaluation Using FEA and Measurements

Pia Lindh; Lassi Aarniovuori; Hannu Karkkainen; Markku Niemela; Juha Pyrhonen

doi:10.1109/ICELMACH.2018.8507154

IM Loss Evaluation Using FEA and Measurements

Pia Lindh, Lassi Aarniovuori, Hannu Karkkainen, Markku Niemela, Juha Pyrhonen

College of Engineering and Physical Sciences

Research output: Chapter in Book/Published conference output › Conference publication

Abstract

This paper describes a typical engineering procedure to analyze the energy efficiency of the designed induction motor. 2D FEM is used to obtain 5 kW induction motor losses. The analysis is performed at four different stator frequencies. The effect of the stator and rotor end regions are taken into account by circuit elements. The values of the parameters to model the end effects are first calculated analytically and later used as parameters in the analysis. The simulated loss components are compared with the ones obtained with IEC segregation of losses method at each supply frequency. Special interest is paid to iron losses. According to simulations and measurements, the utilized IEC loss segregation method gives consistent results.

Original language	English
Title of host publication	2018 XIII International Conference on Electrical Machines (ICEM)
Publisher	IEEE
Pages	1220-1226
ISBN (Electronic)	978-1-5386-2477-7
ISBN (Print)	978-1-5386-2478-4
DOIs	https://doi.org/10.1109/ICELMACH.2018.8507154
Publication status	Published - 25 Oct 2018
Event	2018 XIII International Conference on Electrical Machines (ICEM) - Alexandroupoli, Greece Duration: 3 Sept 2018 → 6 Sept 2018

Publication series

Name	2018 XIII International Conference on Electrical Machines (ICEM)
Publisher	IEEE
ISSN (Print)	2381-4802

Conference

Conference	2018 XIII International Conference on Electrical Machines (ICEM)
Period	3/09/18 → 6/09/18

Access to Document

10.1109/ICELMACH.2018.8507154

Cite this

@inproceedings{5c7e1c850270473fa59d8575ab651c62,

title = "IM Loss Evaluation Using FEA and Measurements",

abstract = "This paper describes a typical engineering procedure to analyze the energy efficiency of the designed induction motor. 2D FEM is used to obtain 5 kW induction motor losses. The analysis is performed at four different stator frequencies. The effect of the stator and rotor end regions are taken into account by circuit elements. The values of the parameters to model the end effects are first calculated analytically and later used as parameters in the analysis. The simulated loss components are compared with the ones obtained with IEC segregation of losses method at each supply frequency. Special interest is paid to iron losses. According to simulations and measurements, the utilized IEC loss segregation method gives consistent results.",

author = "Pia Lindh and Lassi Aarniovuori and Hannu Karkkainen and Markku Niemela and Juha Pyrhonen",

year = "2018",

month = oct,

day = "25",

doi = "10.1109/ICELMACH.2018.8507154",

language = "English",

isbn = "978-1-5386-2478-4",

series = "2018 XIII International Conference on Electrical Machines (ICEM)",

publisher = "IEEE",

pages = "1220--1226",

booktitle = "2018 XIII International Conference on Electrical Machines (ICEM)",

address = "United States",

note = "2018 XIII International Conference on Electrical Machines (ICEM) ; Conference date: 03-09-2018 Through 06-09-2018",

}

Lindh, P, Aarniovuori, L, Karkkainen, H, Niemela, M & Pyrhonen, J 2018, IM Loss Evaluation Using FEA and Measurements. in 2018 XIII International Conference on Electrical Machines (ICEM). 2018 XIII International Conference on Electrical Machines (ICEM), IEEE, pp. 1220-1226, 2018 XIII International Conference on Electrical Machines (ICEM), 3/09/18. https://doi.org/10.1109/ICELMACH.2018.8507154

TY - GEN

T1 - IM Loss Evaluation Using FEA and Measurements

AU - Lindh, Pia

AU - Aarniovuori, Lassi

AU - Karkkainen, Hannu

AU - Niemela, Markku

AU - Pyrhonen, Juha

PY - 2018/10/25

Y1 - 2018/10/25

N2 - This paper describes a typical engineering procedure to analyze the energy efficiency of the designed induction motor. 2D FEM is used to obtain 5 kW induction motor losses. The analysis is performed at four different stator frequencies. The effect of the stator and rotor end regions are taken into account by circuit elements. The values of the parameters to model the end effects are first calculated analytically and later used as parameters in the analysis. The simulated loss components are compared with the ones obtained with IEC segregation of losses method at each supply frequency. Special interest is paid to iron losses. According to simulations and measurements, the utilized IEC loss segregation method gives consistent results.

AB - This paper describes a typical engineering procedure to analyze the energy efficiency of the designed induction motor. 2D FEM is used to obtain 5 kW induction motor losses. The analysis is performed at four different stator frequencies. The effect of the stator and rotor end regions are taken into account by circuit elements. The values of the parameters to model the end effects are first calculated analytically and later used as parameters in the analysis. The simulated loss components are compared with the ones obtained with IEC segregation of losses method at each supply frequency. Special interest is paid to iron losses. According to simulations and measurements, the utilized IEC loss segregation method gives consistent results.

UR - https://ieeexplore.ieee.org/document/8507154/

U2 - 10.1109/ICELMACH.2018.8507154

DO - 10.1109/ICELMACH.2018.8507154

M3 - Conference publication

SN - 978-1-5386-2478-4

T3 - 2018 XIII International Conference on Electrical Machines (ICEM)

SP - 1220

EP - 1226

BT - 2018 XIII International Conference on Electrical Machines (ICEM)

PB - IEEE

T2 - 2018 XIII International Conference on Electrical Machines (ICEM)

Y2 - 3 September 2018 through 6 September 2018

ER -

IM Loss Evaluation Using FEA and Measurements

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this