Multi-wavelength source using low drive-voltage amplitude modulators for optical communications

Tadhg Healy, Fatima C. Garcia Gunning, Andrew D. Ellis, Jeff D. Bull

    Research output: Contribution to journalArticlepeer-review


    A simple and cost-effective technique for generating a flat, square-shaped multi-wavelength optical comb with 42.6 GHz line spacing and over 0.5 THz of total bandwidth is presented. A detailed theoretical analysis is presented, showing that using two concatenated modulators driven with voltages of 3.5 Vp are necessary to generate 11 comb lines with a flatness below 2dB. This performance is experimentally demonstrated using two cascaded Versawave 40 Gbit/s low drive voltage electro-optic polarisation modulators, where an 11 channel optical comb with a flatness of 1.9 dB and a side-mode-suppression ratio (SMSR) of 12.6 dB was obtained.
    Original languageEnglish
    Pages (from-to)2981-2986
    Number of pages6
    JournalOptics Express
    Issue number6
    Publication statusPublished - 19 Mar 2007

    Bibliographical note

    © 2007 OSA
    This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law.


    Dive into the research topics of 'Multi-wavelength source using low drive-voltage amplitude modulators for optical communications'. Together they form a unique fingerprint.

    Cite this